Single-Line Pre-Mix Doorway Foam Unit

Description

FEATURES:

• Includes one nozzle Draws from  pre-mixed solution
• Dilutes product at ratios of 38:1 to 183:1 (water:chemical)
• Repeat cycle timer
• Quick-change pump
• Supports up to 2 nozzle assemblies Up to 25 ft (7.6 m) total disance between control box and nozzle(s)

REQUIREMENTS:

• Compressed air requirements: 40-80 psi (3-5 bar) with 5-10 cfm (141-283 l/min)
• Liquid temperature range: 40-100˚F (4.4-37˚C)
• Electrical requirements: 120 VAC at 60 Hz, 2 amps (GFCI protected outlet)
• Operating voltage: 120 VAC
• Chemical compatibility: Chemical  products used with this equipment must be formulated for this type of  application and compatible with unit materials and pump seals.  For more  information on chemical compatibility, consult the manufacturer or SDS for your product or contact our customer service department.

SPECIFICATIONS:

• Power type: Compressed air, electricity
• Chemical pickup type: Draws from pre-mixed solution
• Dilution ratio range (water:chemical): 38:1 to 183:1
• Number of products unit can draw from (and whether it draws simultaneously or one at a time): One product
• Suction line length/diameter: 8 ft. (2.4 m) clear hose with 1/4 in. (6.4 mm) inside diameter Flow rate: 2 gal/min (7.6 l/min)
• Timer operation type: Repeat cycle
• Coverage area: One nozzle:  up to 9×4 ft. (2.7×1.5 m); Two nozzles:  up to 5×3 ft. (2.4×1.2 m) at each nozzle
• Nozzle type: Single-line nozzle assembly (GK6T)
• Number of nozzles: One control box can support up to two nozzle assemblies
• Distance from nozzles to control box: The combined distance between the control box and the nozzle(s) must equal 25 ft. (7.6 m) or less
• Tubing/fitting sizes: Designed for use with 1/2 in. (12.7 mm) outside diameter tubing between control box and nozzle(s)