Twin Line Pre-Mix Doorway Foam Unit

Description

FEATURES:

• Draws from pre-mixed solution
• Powered by compressed air and electricity
• Repeat cycle timer
• Quick-change pump
• Can support up to 3 nozzles
• Up to 100 ft. (30.5 m) total distance between control box and nozzle(s) (distance does not need to be evenly distributed)

REQUIREMENTS:

• Compressed air requirements: 40-80 psi (3-5 bar) with 5-10 cfm (141-283 l/min)
• Liquid temperature range: 40-100˚F (4.4-37˚C)
• Electrical requirements120 VAC at 60 Hz, 2 amps (GFCI protected outlet)
• Operating voltage: 120 VAC
• Chemical compatibility: Chemical  products used with this equipment must be formulated for this type of  application and compatible with unit materials and pump seals.  For more  information on chemical compatibility, consult the manufacturer or SD for your product or contact our customer service department.

SPECIFICATIONS:

• Power type: Compressed air, electricity
• Chemical pickup type: Draws from pre-mixed solution
• Number of products unit can draw from: One product
• Suction line length/diameter: 8 ft. (2.4 m) hose with 3/8 in. (9.5 mm) inside diameter
• Flow rate: 2 gal/min (7.6 l/min)
• Timer operation type: Repeat cycle
• Coverage area:
  • One nozzle:  up to 9×5 ft. (2.7×1.5 m);
  • Two nozzles:  up to 8×4 ft. (2.4×1.2 m) at each nozzle
  • Three nozzles:  up to 6×3 ft. (1.8×0.9 m) at each nozzle
• Fan tip:
  • One nozzle:  ST80200
  • Two nozzles:  ST80100
  • Three nozzles: ST8060-1/2
• Nozzle type: Twin-line stainless steel assembly (GK7T)
• Number of nozzles: One control box can support up to three nozzle assemblies
• Distance from nozzles to control box: The combined distance between the control box and the nozzle(s) must equal 100 ft. (30.5 m) or less
• Tubing/fitting sizes: Designed for use with 1/2 in. (12.7 mm) outside diameter tubing between control box and nozzle(s)