10 Gallon Fogger Unit with 3 Nozzles and Telescoping Fog Mast

Description

FEATURES:

• Draws from pre-mixed solution
• Powered by compressed air 3 nozzles mounted on a telescoping mast
• Droplet size: 15 micron at 50 psi (3.4 bar)
• Polypropylene and kynar nozzle construction
• A full tank of solution will supply the unit for approximately 1 hour
• Hinged back plate provides tool-free access to components
• Natural color tank for easy visibility of product levels
• Front-facing drain
• In-line strainer to protect pump from debris
• Type of Seals: Viton

REQUIREMENTS:

• Compressed Air: 50 psi (3.4 bar) with 9 cfm (254.9 l/min) Liquid Temperature Range: 40-100˚F (4.4-37˚C)
• Chemical Compatibility: Chemical products used with this equipment must be formulated for this type of application and compatible with unit materials and pump seals.  Generally safe for use with standard alkaline and acid sanitation chemicals when used as per label recommendations.  For more information on chemical compatibility, consult the manufacturer or SDS for your product or contact our customer service department.

SPECIFICATIONS:

• Power Type:  Compressed Air
• Chemical Pickup Type: Draws from pre-mixed solution
• Number of Products Unit Can Draw From (and whether it draws simultaneously or one at a time): One product
• Suction Line Length/diameter: 3/8 in. (9.5 mm) inside diameter
• Capacity: 12.5 gallons (47.32 liters)
• Flow Rate: 3.7 gal/hour at each nozzle
• Droplet Size: 15 microns at 50 psi
• Coverage Area: 1 liter of solution will cover approximately 1000 cubic feet (up to system max of 47,320 cubic feet)
• Run Time From Full Tank: Approx. 1 hour
• Number of Nozzles: 3 nozzles
• Fog Mast Height Range: 3.5-8.5 ft. (1.1-2.6 m)
• Wheel Type: Two 10 inch non-marking wheels

Pump Selection: If your replacement pumps and equipment are primarily exposed to acids, chlorinated products, or caustics, Viton or Kalrez would likely be the most suitable materials. However, if flexibility, resilience, and specific chemical resistance to hydrocarbons or oils are critical, Santoprene might be a better option.