10 Gallon Foamer Unit

Description

FEATURES:

• Draws from pre-mixed solution
• Powered by compressed air
• Hinged back plate provides tool-free access to components
• Quick-change pump
• Natural color tank for easy visibility of product levels
• Hinged Lid
• Integrated hose wraps
• Front-facing drain In-line strainer to protect pump from debris

REQUIREMENTS:

• Compressed Air: 40-80 psi (3-5 bar) with 2 cfm (56.6 l/min)
• Liquid Temperature Range: 40-100˚F (4.4-37˚C)
• Chemical Compatibility: Chemical products used with this equipment must be formulated for this type of application and compatible with unit materials and pump seals. Generally safe for use with standard alkaline and acid sanitation chemicals when used as per label recommendations. For more information on chemical compatibility, consult the manufacturer or SDS for your product or contact our customer service department.

SPECIFICATIONS:

• Power Type: Compressed Air
• Chemical Pickup Type: Draws from pre-mixed solution
• Number of Products Unit Can Draw From (and whether it draws simultaneously or one at a time): One product
• Suction Line Length/diameter: 3/8 in. (9.5 mm) inside diameter
• Capacity: 10 gallons (37.89 liters)
• Discharge Hose Diameter/Length: 30 ft. (9 m) hose, with 3/8 in. (9.5 mm) inside diameter
• Discharge Wand/Tip Type: 7 in. (17.8 cm) stainless steel wand with zero tip and ball valve
• Output Distance: 10-12 ft. (3.0-3.7 m)
• Output Volume: 2 gal/min (7.6 l/min)
• Flow Rate: 2 gal/min (7.6 l/min)
• Wheel Type: Two 10 inch non-marking wheels

Pump Selection: If your replacement pumps and equipment are primarily exposed to acids, chlorinated products, or caustics, Viton or Kalrez would likely be the most suitable materials. However, if flexibility, resilience, and specific chemical resistance to hydrocarbons or oils are critical, Santoprene might be a better option.