15 Gallon Concentrate Foamer

Description

FEATURES:

• Draws from: one or two concentrated products
• Powered by: compressed air
• Dilutes at ratios of 14:1 to 320:1
• Holds two FILL-iT chemical jugs or one standard 5 gallon bucket (chemical jugs/bucket not included)
• Onboard water tank – 15 gallon (56.8 liter) capacity
• Hinged back plate provides tool-free access to components
• Quick-change pump
• Anti-kink hose protection
• Natural color tank for easy visibility of water levels
• Integrated hose wraps
• Front-facing drain
• In-line strainer to protect pump from debris

REQUIREMENTS:

• Compressed Air: 40-80 psi (3-5 bar) with 5-10 cfm (141-283 l/min)
• Liquid Temperature Range: 40-100˚F (4.4-37˚C)
• Chemical Compatibility: Chemical products used with this equipment must be formulated for this type of application and compatible with unit materials and pump seals. For more information on chemical compatibility, consult the manufacturer or SDS for your product or contact our customer service department.

SPECIFICATIONS:

• Power Type: Compressed Air
• Chemical Pickup Type: Draws from concentrated product
• Number of Products Unit Can Draw From (and whether it draws simultaneously or one at a time): Two products
• Suction Line Length/diameter: 3/8 in. (9.5 mm) inside diameter (water suction)
• Capacity: 15 gallons (56.78 liters) of water; Up to 10 gallons (37.85 liters) of concentrate
• Discharge Hose Diameter/Length: 30 ft. (9 m) hose, with 3/4 in. (19 mm) inside diameter
• Discharge Wand/Tip Type: 7 in. (17.8 cm) stainless steel wand with zero tip and ball valve
• Output Distance: 25-30 ft. (7-9 m)  Output Volume: 20-45 gal/min (75-170 l/min) of foam
• Flow Rate: 2 gal/min (7.6 l/min)
• Tubing/Fitting sizes: 1/4 in. (6.35 mm) inside diameter for concentrate suction line
• Wheel Type: Two 10 inch non-marking wheels, Two 5 inch casters with lock

Pump Selection: If your replacement pumps and equipment are primarily exposed to acids, chlorinated products, or caustics, Viton or Kalrez would likely be the most suitable materials. However, if flexibility, resilience, and specific chemical resistance to hydrocarbons or oils are critical, Santoprene might be a better option.